27
First steps
Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / starting.fm / 28.04.2009
Ve
rs
ion 8,
03
.09
.200
8
Icons on the idle display
The following is displayed:
u
the internal number, e.g.
INT 1
.
u
the quality of the reception signal between base station and handset (signal
strength):
– poor to good:
Ò Ñ i Ð
– no reception:
|
flashes
u
battery charge status:
–
=
e
V
U
(empty to full)
–
=
flashes: batteries almost empty
–
e
V
U
flashes: charging procedure
No connection to the Internet/VoIP server
If one of the following messages is displayed instead of the internal name after
the connection wizard is closed, errors have occurred:
u
Server not accessible!
u
SIP registration failed
Below you will find possible causes and measures you can take.
Server not accessible!
The phone has no connection to the Internet.
¤
Check the cable connections between the base station and the router (the
LED on the base station must light up) and the connection between the
router and the Internet connection.
¤
Verify that the phone is connected to the LAN.
– It may not have been possible to dynamically assign an IP address to the
phone
or
– You have assigned a static IP address to the phone that has either already
been assigned to another LAN subscriber or does not belong to the
router's address block.
¤
Press the Paging key on the base station. The IP address appears on the
handset display.
¤
Press the Talk key on the handset to end paging call.
¤
Start the Web configurator with the IP address.
¤
If no connection can be established, change the settings on the router
(activate DHCP server) or the phone's IP address.
