Siemens Gigaset A580 User Manual Download Page 151

Page: 151 / 197

150

Appendix

Gigaset A580 IP / US English / A31008-xxxx-xxxx-x-xxxx / appendix.fm / 28.04.2009

ion 8,

.09

.200

Appendix

Care

Wipe the base station, charging cradle and the handset with a

damp

cloth

(do not use solvent) or an antistatic cloth.

Never

use a dry cloth as this can cause static.

Contact with liquid

If the handset should come into contact with liquid:

Switch off the handset and remove the battery pack immediately

Allow the liquid to drain from the handset.

Pat all parts dry, then place the handset with the battery compartment open

and the keypad facing down in a dry, warm place

for at least 72 hours

(

not

in a microwave, oven, etc.).

Do not switch on the handset again until it is completely dry.

When it has fully dried out, you will normally be able to use it again.

Specifications

Recommended batteries

Technology:

Nickel-metal-hydride (NiMH)

Size:

AAA (Micro, HR03)

Voltage:

1.2 V

Capacity: 550–1000 mAh
We recommend the following battery types, because these are the only ones

that guarantee the specified operating times, full functionality and long service

life:

GP 700 mAh

Yuasa Phone 700 mAh

Yuasa Phone 800 mAh

Yuasa AAA 800

Peacebay 600 mAh

The device is supplied with two recommended rechargeable batteries.

Summary of Contents for Gigaset A580






































































































































































































Search results

Summary of Contents for Gigaset A580

Reviews:

Brands by name

Popular brands

Siemens Gigaset A580, User Manual

Search results

Summary of Contents for Gigaset A580

Reviews:

Brands by name

Popular brands