83
Using several handsets
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / T-NetBox_SAG-registration.fm / 24.03.2010
V
e
rsion 8, 03.0
9
.2008
Using several handsets
Registering handsets
You can register up to six handsets to your base station.
When you register a new Gigaset handset, the base station transfers the corre-
sponding entries to its local directory to enable you to use online directories on
your new handset.
u
Select
Gigaset.net
for the Gigaset.net directory (
Precondition:
The handset can send and receive directory entries (see handset user
guide).
Successful registration is acknowledged with the message
Data Transfer x entries
rec
for this reason.
Registering another Gigaset A58H handset on the
Gigaset A580 IP
Before you can use your handset, you must register it to the base station.
You must initiate handset registration on the handset and on the base station.
The handset will return to idle status if registration was successful. The handset's
internal name is shown in the display, e.g.
INT 1
. If it does not appear, repeat the
procedure. Registration can take up to one minute.
¤
On the handset:
Select
§Menu§
¢
Settings
¢
Handset
¢
Register Handset
and press
§OK§
.
¤
Enter the system PIN of the base station (the default is 0000) and press
§OK§
.
Handset is registering
flashes on the display.
¤
Within the next 60 seconds press and
hold
(for approx. 3 seconds) the registra-
tion/paging key (
on the base station
.
The handset is assigned the lowest available internal number (1-6). The internal
number appears in the display after registration, e.g.
INT 2
. This means that the
internal number 2 has been assigned to the handset.
Please note
u
If several handsets are registered on your base station, you can simultaneously
make two calls via the Internet and one via the fixed line network. Up to two
additional internal connections are also possible.
u
Selecting the type of connection via the talk key (
) is not supported
on GAP handsets, i.e. if you enter a phone number without a line suffix and
without defining a dialling plan for the phone number it will be dialled via the
default line
u
After registration, all the phone numbers for the phone will be assigned to the
handset as receive numbers. It will use the fixed line network number and the
first VoIP number in the configuration as send numbers.
For how to change the assignments,
.