Siemens Gigaset A580 IP, Manual

Page: 63 / 212

62
Using lists
Gigaset A580 IP / GBR / A31008-xxxx-xxxx-x-xxxx / directories_charges.fm / 24.03.2010
V
e
rsion 8, 03.0
9
.2008
Opening lists with the message key
You can use the message key
f
to open the following list selection:
u
Calls list
u
SMS list,
£
Page 73
u
Network mailbox,
£
Page 80
A separate list is displayed for each network mailbox.
Precondition: Its number is saved in the base station, it is switched on
(
£
Page 143 ) and the corresponding VoIP/fixed line network number is
assigned to the handset as a receive number.
An advisory tone sounds as soon as a new message arrives in a list. The
f
key
flashes (it goes off when the key is pressed). The message You have new messages
appears in the display in idle status .
List selection
The lists displayed after pressing the message key
f
depend on whether there
are any new messages.
f
key does not flash (no new messages): All lists are displayed. Select a list with
q
. To open, press
§OK§
.
f
key flashes (new messages received): All the lists that contain new messages
are displayed as well as the network mailbox lists, whose connection is assigned to
the handset as a receive number (
Net AM Fixed Line , Net AM IP1 ,...).
Incoming SMS message list
All received SMS messages are saved in the incoming message list,
£
Page 73 .
Network mailbox lists
If you select a network mailbox list and press
§OK§
, you are connected directly to the
network mailbox. For information on the network mailbox,
£
Page 80 .
Calls list
The calls list contains the last 20 numbers, depending on the type of list set
u
all calls
– answered calls
– unanswered calls
u
missed calls
– unanswered calls
In the list of missed calls, multiple calls from the same number will be stored once
(the latest call). The number of calls from this number is shown in brackets after the
entry.
In the list of answered calls, multiple calls from the same number are stored several
times.