36
Press keys:
Registering and de-registering handsets
Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619
mobilt_an.fm
11.06.01
Manual registration
Gigaset 4000 handsets at the Gigaset
4000 base station
If a handset has already been registered at a different
base station, you must now register it at your base sta-
tion. The Gigaset 4000 Classic handset cannot be reg-
istered at more than one Gigaset 4010Classic base sta-
tion at one time.
Step 1:
NNNNNNNNNNNN
MENU
Open the menu.
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
REGISTER HS
Select the menu item and confirm,
is dis-
played.
NNNNNNN
Enter the 4-digit system PIN (factory setting: 0000) and
confirm.
After entering the system PIN,
flashes
in the display.
Step 2:
Underside of the base
station
G
Press the key on the underside of the base station
briefly. A signal tone is generated at the base station.
The next unassigned internal number (1 – 6) is auto-
matically assigned to the handset.
If all numbers are assigned, the internal number 6 is re-
assigned. The handset which was registered under
number 6 is then deregistered.
After about a minute the internal number of the hand-
set is shown in the left-hand corner of the display
(e.g. “2“).
PIN ****
REGISTER HS
