Siemens Gigaset 4010 Classic Operating Instructions Manual Download Page 38

Page: 38 / 69

Press keys:

Making cost-effective calls

Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619

kosten.fm

11.06.01

Displaying/deleting call charges

You can have the following call charges displayed:

●

The charges of the last call,

●

The total call charges of all handsets.

NNNNNNNNNNNN

Open the menu.

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

CALL CHARGES

Select the menu item and confirm.

NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

LAST CALL

Confirm.
The charges of the last call are displayed.

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

ALL CALLS

Select the menu item and confirm.
The call charges of all handsets are displayed.

●

The call charges are displayed if previously set.
If not, the units are displayed.

●

If you now press

, the call charges or units

are deleted.

Summary of Contents for Gigaset 4010 Classic






































































Search results

Summary of Contents for Gigaset 4010 Classic

Reviews:

Related manuals for Gigaset 4010 Classic

Brands by name

Popular brands

Siemens Gigaset 4010 Classic, Operating Instructions Manual

Search results

Summary of Contents for Gigaset 4010 Classic

Reviews:

Related manuals for Gigaset 4010 Classic

Brands by name

Popular brands