Siemens Gigaset 4010 Classic Operating Instructions Manual Download Page 29

Page: 29 / 69

Press keys:

Mailbox features

Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619

t_net_lm.fm

11.06.01

Call forward

Incoming calls are diverted to another telephone
number. You can define the following conditions:

●

Immediately

●

When the call is not answered

●

When the number is busy.

You want to divert all calls to another number
permanently.

NNNNNNNNNNNN

Open the menu.

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

SEL SERVICES

Select the menu item and confirm.

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

CALL DIVERT

Select the menu item and confirm.

NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

ALL

Select the menu item and confirm.

NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

AUTOMATIC

Set to automatically divert all incoming calls. Calls are
no longer signalled.

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

NO ANSWER

Set to divert incoming calls if nobody answers after
several ring cycles.

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

IF BUSY

Set to divert incoming calls when your line is busy.

Then activate or deactivate:

NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

Activate call divert.

NNNNNNN

Enter the telephone number to which incoming calls
should be diverted.

NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN

OFF

Deactivate call divert.

After confirmation from the telephone network, press
the end call key

Summary of Contents for Gigaset 4010 Classic






































































Search results

Summary of Contents for Gigaset 4010 Classic

Reviews:

Related manuals for Gigaset 4010 Classic

Brands by name

Popular brands

Siemens Gigaset 4010 Classic, Operating Instructions Manual

Search results

Summary of Contents for Gigaset 4010 Classic

Reviews:

Related manuals for Gigaset 4010 Classic

Brands by name

Popular brands