manualshive.com logo in svg

Siemens Gigaset 108, User Manual, Page: 68 / 142

Share
Download
Siemens Gigaset 108 User Manual Download Page 68

68

Administration

Gigaset WLAN Repeater 108 / englisch / A31008-M1030-B101-3x-7619 / admin.fm / 06.11.2008

Te

m

plat

e 20

05_0

5_02

System Password

You can assign a System Password for the configuration environment of your Gigaset 
WLAN Repeater 108, and specify the period after which a session is to end automatically 
if no further entry is made.

ì

In the 

Administration

 menu, select 

System Password

.

After installation, the Gigaset WLAN Repeater 108 configuration is protected by the 
System Password 

admin

. To prevent unauthorised changes to the configuration, you 

should change the System Password. You may have already set a System Password when 
setting up the 

Security Setup Wizard

. If so, you can change it here.

ì

Enter the current System Password in the 

Current password

 field.

ì

Enter a new password in the 

New password

 field, and repeat it in the 

Confirm new password

 field. 

The password may contain up to 20 characters. The password is case sensitive. Avoid 
proper names and words that are too obvious. Use a combination of letters, numbers 
and special characters.

Note:

Only one connection to the configuration environment can be started at any one 
time.

Please note:

If you ever forget your System Password, you will have to reset your Gigaset WLAN 
Repeater 108 (see page 13). Please bear in mind that this will restore 

all

 the settings 

to the factory configuration. The password is reset to the default setting 

admin

.

Summary of Contents for Gigaset 108















































































































































Reviews:

No comments