![background image](http://html.mh-extra.com/html/siemens/fx-c/fx-c_repair-instructions_385038018.webp)
6 REPAIR
6.1
Diagnosis / Repair aids
6.1.1 General
Before repairing or testing the appliance, always start the customer-
service test programme.
6.1.2 Test
prod
Test probe mat. no.: 340730 (remove the components from the
module before measuring the resistance)
6.1.3 Protective
gloves:
Material no.:
size 9 = 340728
size 10 = 340729
6.1.4 Screwdriver
Screwdriver of 85 mm to disassembly the screw of the front panel.
mat. no 460621.
6.1.5 Unbalanced load detection
The termination of the spin cycle by the unbalanced load scan can be
reset with the aid of a water-filled thermal bottle. The thermal bottle
with contents must weight at least 800 g.
6.1.6 Plastic side cutters
Plastic side cutters mat. no.: 340701 for repairs to the outer tub.
6.1.7 Drill
bit
Drill bit (13.2 mm) mat. no.: 340700 for repairs to the friction dampers.
209_58300000115677_ara_en_f.doc – 26.03.08
Seite 18 von 34