Siemens FT2080 Operation Manual Download

Page: 140 / 180

Operation
Testing

140
Building Technologies

A6V10380629_en--_a

Fire Safety

2015-09-10

5.7.5 Testing indicators

The display test is a functional hardware check for the following indication

elements:

Display

LEDs

Buzzer

At the same time, indication and operation devices that have been installed as

options, e.g. the mimic display driver or fire brigade operating panels, are activated

by commands if they offer the possibility of performing a display test.
The test takes 10 seconds and has two phases of 5 seconds each.

Depending on the configuration, the 'LED test' command is available as softkey in

the 'Main menu'.

Testing the indicators and displays

You are in 'Main menu'.

1. Select the 'Settings/administration' menu item.

The 'Settings/administration' menu is displayed.

2. Select the 'LED test' menu item.

Phase 1 starts:

Display is totally white.

LEDs are in color mode 1.

Phase 2 starts:

Display is totally black.

LEDs are in color mode 2.

Summary of Contents for FT2080





















































































































































































Search results

Summary of Contents for FT2080

Reviews:

Related manuals for FT2080

Brands by name

Popular brands

Siemens FT2080, Operation Manual

Search results

Summary of Contents for FT2080

Reviews:

Related manuals for FT2080

Brands by name

Popular brands