manualshive.com logo in svg

Siemens FT2010, Operation Manual, Page: 32 / 40

Share
Download
Siemens FT2010 Operation Manual Download Page 32

Alarm verification concept (AVC)
Fire alarming

7

32 | 40
Building Technologies

009310_l_en_--

Fire Safety

2018-08-29

7.4 Fire alarming

Alarming is controlled at ↑ 'Area' level. During alarming the ↑ alarming equipment

is activated, e.g., ↑ alarm devices and remote transmission devices.

Alarm devices

For ↑ local and ↑ global alarming, acoustic alarm devices, beacons, digital outputs,

etc., can be used. The tone of the alarm devices can be configured differently for

local and global alarming (the alarm devices must be suitable for this).

Remote transmission

The alarm message is transmitted to an intervention station. In the case of local

alarming, this is usually the company fire brigade and for global alarm usually the

state fire brigade. A remote transmission device must be used to transmit alarm

messages via the public telephone network.

Figure 6: Information flow during alarming

AVC  'Alarm Verification Concept'

f

↑ Alarming control

C

↑ 'Control tree'

Y

Local and global alarming

e

'Alarming control group'

Summary of Contents for FT2010









































Reviews:

No comments