Siemens FST020, Function Manual, Page: 55 / 194

Setup
3.2 Process values
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
53
3.2.6 Kinematic viscosity
3.2.6.1 Units
Description
Units for kinematic viscosity.
Read only.
Setting m
2
/s (square meters per second); cSt (1 centistoke = 1 mm
2
/s); St (stokes, 1St = 1cm
2
/s)
Default m
2
/s (square meters per second)
Related
Path Setup → Process values → Kinematic viscosity → Units
3.2.6.2 Decimal places
Description
Sets the decimal places for the process value displayed in the local display.
Setting Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
Default 2 decimal places
Related
Path Setup → Process values → Kinematic viscosity → Decimal places
3.2.6.3 Alarm and warning limits
3.2.6.3.1 Upper alarm limit
Description
If process value exceeds this limit an alarm is triggered.
Setting -9999997952 m²/s to +9999997952 m²/s
Default +9999997952 m²/s
Related
Path Setup → Process values → Standard kinematic viscosity → Alarm and warning limits → Up-
per alarm limit