Siemens FST020, Function Manual, Page: 103 / 194

Setup
3.10 View 3
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
101
Related
If Enabled is selected, all parameters for View 3 must be configured.
Path Setup → Display → View 3 → Enable or disable
3.10.2 View
Description
The display View 3 can be configured.
Setting Single value; Three values; Totalizer; Dosing; 1 value and bargraph; 1 value and graph;
Six values; Six diagnostic values; Alarm list
Default 1 value and bargraph
Related
If Single value or Dosing is selected, 1st process value must be configured.
If Three values is selected, 1st process value, 2nd process value and 3rd process value
must be configured.
If Totalizer or 1 value and graph is selected, 1st process value, Trend scale mode and Trend
log time window must be configured.
If 1 value and bargraph is selected, 1st process value must be configured.
If Six values or Six diagnostic values is selected, 1st process value, 2nd process value, 3rd
process value, 4th process value, 5th process value, and 6th process value must be
configured.
Path Setup → Display → View 3 → View
3.10.3 1st value
Description
The display 1st Process Value can be selected. This process value is shown in all view
types.
Setting Volume flow; Mass flow; Flow velocity; Sound velocity; Density; Kinematic viscosity; Total-
izer 1; Medium Temperature
Default Volume flow
Related
Path Setup → Display → View 3 → 1st Value