GUI
Dynamic loading
5
60 | 412
Building Technologies
A6V10210424_j_en_--
Fire Safety
2018-08-29
5.15 Dynamic loading
To increase the performance of Cerberus-Engineering-Tool, not all 'Stations' are
loaded to the software at the same time for
'Sites' with more than eight
'Stations'. 'Stations' that are not loaded are shown in gray and in italics. The
'Stations' are dynamically loaded and unloaded, depending on the selection. You
can load a maximum of eight 'Stations' at the same time.
The following sections describe dynamic loading in various software functions.
Structure tree view
As soon as a 'Station' that is not loaded is clicked on, it is loaded. You can highlight
a maximum of eight 'Stations' at the same time. If you highlight more than eight
'Stations', an error message appears.
Figure 14: Structure tree view with stations that are and are not loaded
History of the 'Stations'
Only the history of the 'Stations' that is currently loaded is displayed on the 'History'
tab of the 'Site properties' window as standard. If you would like to see the history
of all 'Stations', click on 'Get station logs'.
Search function
For the function 'Find and replace', you can specify whether only the loaded
'Stations' or both the loaded and unloaded 'Stations' are to be included.
Designation of problems and displaying errors
The 'Stations' that are not loaded are shown in gray in the 'All problems' window. If
you would like to view the errors and warnings of a 'Station' that is not loaded, click
on the 'Station' to load it.
