'Network' task card
Network configuration
14
315 | 412
Building Technologies
A6V10210424_j_en_--
Fire Safety
2018-08-29
14.2.4 Configuring GAP with DHCP server
NOTICE
GAP with DHCP server on public network
Devices on the public network have incorrect IP addresses.
●
A GAP must only be configured on private networks with a DHCP server.
GAP can be configured with a DHCP server. This results in a PC automatically
receiving an IP address when a connection is established to the GAP via C-
WEB/LAN.
w
'Station' is configured as GAP.
1. Open the 'Global system configuration' > 'FS720 network configuration' >
'Ethernet sub-net' > 'Functions' elements in the tree view of the 'Network' task
card.
2. Highlight the 'Station'.
3. Check the 'DHCP server enabled' checkbox on the 'Overview' tab of the detail
editor.
a
The 'Station' is configured with DHCP server.
14.2.5 Manual allocation of addresses in the sub-nets
If the 'Ethernet sub-net' is incorporated in an existing IT infrastructure, the settings
for the sub-net mask and IP address must be made manually following the IT
administrator's instruction.
IP addresses for Ethernet and
router stations
IP addresses ranging from 192.168.200.0…192.168.200.255 to
192.168.255.0…192.168.255.255 are reserved in FS720 can cannot be used.
