Siemens FIDAMAT 6, Operating Instructions Manual, Page: 39 / 202

FIDAMAT 6
Operating Instructions, 01/2019, A5E00222135-04
37
Installing
4
4.1 Safety information for installation
WARNING
Parts in contact with sample gases unsuitable for sample gas
Danger of injury or poisoning, device damage
Hot, poisonous and corrosive sample gases can be released at the connections if the
device parts and accessories coming into contact with sample gas are unsuitable for the
sample gas.
• Use only sample gas-contacting connecting parts (pipes, unions and sealing material)
that are suitable for the connection and for the sample gases. Refer to the information in
the section "Technical specifications".
WARNING
Introduction of combustible gases
Danger of explosion
The device is not designed for measurement of ignitable gas mixtures.
•
If the device is used to measure flammable gases that can combine with air or oxygen to
form an ignitable gas mixture, take special explosion protection measures!
NOTICE
Improper installation
The device can be damaged or destroyed or its functionality impaired through an incorrect
installation.
•
Make sure before installing the device that there is no visible damage.
• Ensure that the process connections are clean and that the seals and cable glands are
suitable.
•
Mount the device using a suitable tool.