Operation
5.10 Parameters
FIDAMAT 6-G
Operating instructions, 07/2006, A5E00478463
5-33
Select softkey 1 "Parameters".
Here, allocate the measured value axis a certain measuring range:
Meas.val. disp.par. THC
Optimum meas. val. dis.
Range 1
Range 2
Range 3
Range 4
Figure 5-35 Parameters for measured value representation
Activate
"Optimum measured value display" in order to have the measured value axis
automatically scaled. The device adapts the scale to the measured value dispersion.
5.10.7
Measured value display (function 55)
Figure 5-36 Parameterizing the measured value display
With this function, you can parameterize the display of measured values.
With softkey 1, you suppress the display of negative measured values.
With softkey 2 "automatic", you can activate the automatic display of the measured value
with 5 digits. The number of decimal digits depends on the size of the measured value.
With the softkeys 3 and 4, you can choose the number of total digits and the maximum
number of decimal digits.
Observe that a maximum of five digits can be displayed (decimal point also counts as a
digit).