manualshive.com logo in svg

Siemens FDUL221, Technical Manual, Page: 52 / 76

Share
Download
Siemens FDUL221 Technical Manual Download Page 52

6 

Operation 
Viewing line topology 

 

52 
Building Technologies 

 

008250_i_en_-- 

Fire Safety 

 

2013-08-15 

6.7.1

 

Loop 

The 'loop' topology is permitted. 

 

Detector line on the control panel  Arrangement of the line devices 

Display 

 

 

 

 

The line devices are displayed in the order of the loop. The display shows the 

number of the line device in brackets. E.g. [T001] for the first line device. In the 

case of the red outlined device, the internal alarm indicator flashes. If an external 

alarm indicator is connected to this device, the external alarm indicator also 

flashes. 

6.7.2

 

Stub 

The 'stub' topology is permitted. 

 

Detector line on the control panel  Arrangement of the line devices 

Display 

 

 

 

 

The line devices are displayed in the order of the stub. The display shows the 

number of the line device in brackets. E.g. [T001] for the first line device. In the 

case of the red outlined devices, the internal alarm indicator flashes. If an external 

alarm indicator is connected to these devices, the external alarm indicator also 

flashes. 

Summary of Contents for FDUL221













































































Reviews:

No comments