manualshive.com logo in svg

Siemens FCT010/DSL, Operating Instructions Manual, Page: 7 / 180

Share
Download
Siemens FCT010/DSL Operating Instructions Manual Download Page 7

Introduction

1

These instructions contain all information required to commission and use the device. Read the 
instructions carefully prior to installation and commissioning. In order to use the device 
correctly, first review its principle of operation.

The instructions are aimed at persons mechanically installing the device, connecting it 
electronically, configuring the parameters and commissioning it, as well as service and 
maintenance engineers.

This document is delivered as standard in electronic media with the device. The latest version 
can be downloaded at www.siemens.com (

http://support.automation.siemens.com/WW/

view/en/60666565/134200

).

1.1

Document history

The following table shows major changes in the documentation compared to the previous 
edition. 

The most important changes in the documentation when compared with the respective 
previous edition are given in the following table.

Edition

Note

06/2020

Second edition
• Chapter Technical data (Page 107) updated
• Overall revision of chapters and contents

06/2017

First edition

NOTICE
Use in a domestic environment

This Class A Group 1 equipment is intended for use in industrial areas.

In a domestic environment this device may cause radio interference.

SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB

7

Summary of Contents for FCT010/DSL





















































































































































































Reviews:

No comments