manualshive.com logo in svg

Siemens FCT010/DSL, Operating Instructions Manual, Page: 29 / 180

Share
Download
Siemens FCT010/DSL Operating Instructions Manual Download Page 29

NOTICE
Aggressive atmospheres

Damage to device through penetration of aggressive vapors.
• Ensure that the device is suitable for the application.

NOTICE
Direct sunlight

Damage to device.

The device can overheat or materials become brittle due to UV exposure.
• Protect the device from direct sunlight.
• Make sure that the maximum permissible ambient temperature is not exceeded. Refer to 

the information in Technical data (Page 107).

4.1.2

Proper mounting

NOTICE
Incorrect mounting

The device can be damaged, destroyed, or its functionality impaired through improper 
mounting.
• Before installing ensure there is no visible damage to the device.
• Make sure that process connectors are clean, and suitable gaskets and glands are used.
• Mount the device using suitable tools. Refer to the information in Technical data (Page 107).

WARNING

Loss of type of protection

Risk of explosion. Damage to device if the enclosure is open or not properly closed. The type of 
protection specified on the nameplate or in Technical data (Page 107) is no longer guaranteed.
• Make sure that the device is securely closed.

Installing/mounting

4.1 Basic safety notes

SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB

29

Summary of Contents for FCT010/DSL





















































































































































































Reviews:

No comments