Siemens FC7xx Operation Manual Download Page 76

Page: 76 / 184

Operation
Testing

76 | 184
Building Technologies

A6V10211076_i_en_--

Fire Safety

2015-12-15

5.12.4 Control test

The 'Control test' checks the function of configured controls.

During the 'Control test', the controls function in the same way as during normal

operation; however, the hardware is not actuated.

The ↑ effects of the controls, e.g., the actuation of digital outputs and the sounders

or the execution of commands is ensured, but the respective hardware receives no

signal and is thus not activated.

All controls can be set to 'Control test'.

Testing a control

1. Select 'Main menu' > 'Functions'.



The 'Functions' window is open.

2. Select 'Test'.



A list of all element categories on which a command of the 'Test' command

group can be executed is indicated.

3. Select the ↑ 'Fire control group' element category.



The 'Enter address' window is open.

4. Press <ok> without entering an address.



A list of all 'Fire control groups' is displayed.

5. Select the desired 'Fire control group' and press <softkey 1>.



The 'Select command' window is open.

6. Select 'Control test'.



The control test is performed.

Example of selecting commands for the 'Control test' in the 'Fire

control group' element category:

Selecting element category
↑ Section
Zone
Sounder
RT control
Fire control group

(2)
(3)
(4)
(5)
(6)

Select command
Control test END
Control test

(1)
(2)

Summary of Contents for FC7xx

























































































































































































Search results

Summary of Contents for FC7xx

Reviews:

Related manuals for FC7xx

Brands by name

Popular brands

Siemens FC7xx, Operation Manual

Search results

Summary of Contents for FC7xx

Reviews:

Related manuals for FC7xx

Brands by name

Popular brands