manualshive.com logo in svg

Siemens FC300, Operating Instructions Manual, Page: 95 / 518

Share
Download
Siemens FC300 Operating Instructions Manual Download Page 95

Before using the flow meter for the first time, essential parameters should be considered. After 

confirming/changing date and time you can choose to accept the default values or start the 

Quick commissioning wizard.
You will be asked if you want to start the "Quick commissioning" wizard. If you choose "Yes" 

(recommended), the "Quick commissioning" wizard will start. If you choose "No", you accept 

the default values of the device, and the next HMI view will be the operation view 1.

Start

Language

Quick commissioning

Set date and time

No

Yes

Continue with Quick commissioning wizard

First startup wizard is now finished 

Welcome

Text

Options/description

Language

Set the language: English, Deutsch

Welcome

Information about the "Quick commissioning" wizard

Set date and time

The set date and time (real time clock) is used for all time stamps of logged 
information.

Quick commissioning

The "Quick commissioning" wizard comprises the most important param‐
eters/menus for quick configuration of the flowmeter.

6.3.4

Commissioning via HMI

6.3.4.1

Wizard introduction

In this chapter it is described how to commission the device via the local display (HMI) using 

the Quick Commissioning wizard.
For further information on how to navigate the wizards, refer to Wizards (Page 100).     
In the wizard graphics below, the HMI view numbers are stated to the left.
The first view in each wizard (About - view 1) is a description of what settings/actions can be 

performed using the specific wizard.

Commissioning

6.3 Local commissioning

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

95

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Reviews:

No comments