Siemens FC300 Operating Instructions Manual Download Page 83

Page: 83 / 518

5.3.3

Wiring

1. Connect transmitter and sensor using the multiple plug connector on the blue cable supplied

with the sensor.

Figure 5-4

Sensor and transmitter connection

2. Connect grounding terminal

①

to protective earth (PE).

Figure 5-5

Grounding terminal

Note
Cable screen
The sensor cable screen is mechanically connected to the grounding terminal (PE), when

the multiple plug is correctly tightened.

Wiring tool

Use the wiring tool for connecting the cables in the compact housing transmitter.
The wiring tool is located in the application terminal compartment.

Figure 5-6

Wiring tool location

Connecting

5.3 Wiring information

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Search results

Summary of Contents for FC300

Reviews:

Siemens FC300, Operating Instructions Manual, Page: 83 / 518

Search results

Summary of Contents for FC300

Reviews: