manualshive.com logo in svg

Siemens FC300, Operating Instructions Manual, Page: 73 / 518

Share
Download
Siemens FC300 Operating Instructions Manual Download Page 73

5.2.4.4

Connecting the Modbus (CH1)

1. Remove cap and ferrule from cable gland and slide onto cable.
2. Push cable through open gland and cable path.
3. Restore ferrule and tighten cap to lightly hold cable in place.
4. Signal cable screen is folded back over outer sheath and grounded beneath cable clamp.
5. Connect wires to terminals using wiring tool, field mount transmitter

5

4

6

7

Modbus

④

In + (B)

⑤

In - (A)

⑥

Out + (B)

⑦

Out - (A)

  Functional Earth

6. Connect wires to terminals using wiring tool, wall mount transmitter.

Modbus

④

In + (B)

⑤

In - (A)

⑥

Out + (B)

⑦

Out - (A)

7. Tighten cable gland.

Connecting

5.2 Connecting MASS 2100/FC300

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

73

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Reviews:

No comments