Siemens FC300, Operating Instructions Manual, Page: 514 / 518

Level 3 Level 4 Level 5
No. Name No. Name No. Name
4.3 Modbus (Channel 1) 4.3.1
Slave address (SW)
4.3.2 Slave address (HW)
4.3.3
Restart communication
4.3.4 Data rate
4.3.5
Parity and stopbits
4.3.6 Floating point byte error
4.3.7
Integer byte order
4.3.8 Register mapping
4.3.9 Modbus units
4.3.9.1 Mass flow units
4.3.9.2 Volume flow units comms
4.3.9.3 Standard volume flow
units
4.3.9.4 Density units
4.3.9.5 Fraction mass flow units
4.3.9.6 Fraction volume flow
units
4.3.9.9 Temperature units
4.3.9.10 Totalizer 1 units
4.3.9.11 Totalizer 2 units
4.3.9.12 Totalizer 3 units
4.3.10 Damping
4.3.10.0 Damping value
4.3.10.1 Process values (1)
4.3.10.2 Process values (2)
4.4 PROFIBUS DP/PA 4.4.1 Slave address
D.22 Menu item 5: Security
Table D-30 Security
Level 3 Level 4 Level 5
No. Name No. Name No. Name
5.1 Change user PIN
5.2 Change expert PIN
5.3 Recovery ID
5.4 PIN recovery
5.5 Activate user PIN
5.6 Deactivate user PIN
5.7 Auto logout
5.8 Logout
HMI menu structure
D.22 Menu item 5: Security
MASS 2100 & FC300 (FCT030)
514
Operating Instructions, 06/2017, A5E39789040-AA