Siemens FC300 Operating Instructions Manual Download Page 51 | Manualshive

Page: 51 / 518

Siemens FC300 Operating Instructions Manual Download Page 51

4.2.2.1

Remote transmitter mounting

Mounting on wall

1. Prepare holes with aid of mounting bracket, see Mounting bracket (Page 257).
2. Fasten mounting bracket with black cushion pad to wall (torque 10 Nm).

Mounting on pipe

1. Mount mounting bracket with cushion pad on pipe using fastening brackets/U-bolts and

supplied pipe adaptor. Note: U-bolts and other miscellaneous hardware are not supplied

with the flowmeter.

2. Tighten nuts (torque: 10 Nm).

Note
Hygienic applications
If the device is wall or pipe-mounted in a hygienic application, always use domed nuts.

Installing/mounting

4.2 Installation instructions

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

51

«
...
49
50
51
52
53
...
»

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Reviews:

No comments