manualshive.com logo in svg

Siemens FC300, Operating Instructions Manual, Page: 127 / 518

Share
Download
Siemens FC300 Operating Instructions Manual Download Page 127

Fixed display text

Diagnostic value name

PULSE (CH4)

Pulse (channel 4)

STATUS (CH2)

Status (channel 2)

STATUS (CH3)

Status (channel 3)

STATUS (CH4)

Status (channel 4)

INPUT (CH3)

Input (channel 3)

INPUT (CH4)

Input (channel 4)

7.2.1.9

Navigation view

Navigation view   

The navigation views present the menu structure of the device. All menu items are uniquely 

identified with menu item number.
Level 1 of the navigation view (entered from the operation view) is standardized for all Siemens 

Process Instrumentation devices and covers the following groups:
1. Quick Start (menu): Lists the most important parameters for quick configuration of the 

device. All parameters in this view can be found elsewhere in the menu.

2. Setup (menu): Contains all parameters which are needed to configure the device.
3. Maintenance & Diagnostics (menu): Contains parameters which affect the product behavior 

regarding maintenance, diagnostics and service.

Examples: Verification, failure prediction, device health, data logging, alarm logging, report, 

condition, monitoring, tests, etc.

4. Communication (menu): Contains parameters which describe the Profibus, Profinet, HART, 

Modbus, X-bus communication settings of the device.

Operating MASS 2100/FC300 with FCT030

7.2 Operating instructions

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

127

Summary of Contents for FC300







































































































































































































































































































































































































































































































































Reviews:

No comments