Flex Zone
en
19
|
Flex Zone
Flex Zone
You can use each flex zone as a single hotplate or as
two independent hotplates, as required.
It consists of four inductors that work independently of
each other. If using the flexible cooking zone, only the
area that is covered by cookware is activated.
Advice on using cookware
To ensure that the cookware is detected and heat is
distributed evenly, correctly centre the cookware:
As a single hotplate
The flexible cooking zone is activated as a single
hotplate.
Activating
1.
Select the flexible cooking zone by touching the
Ä
symbol.
2.
Select the required heat setting from the settings
area.
The flexible cooking zone has now been activated.
Changing the heat setting
Select the hotplate and change the heat setting in the
relative settings area.
Adding a new item of cookware
Set the new piece of cookware down on the hotplate
and then touch the
ý
symbol twice. The new piece of
cookware will be detected and the heat setting that was
previously selected will be retained.
Note:
If the cookware is moved to the hotplate being
used or lifted up, the hotplate begins an automatic
search and the heat setting selected previously is
retained.
Deactivating
Touch the
ý
symbol.
This deactivates the flexible cooking zone. The two
hotplates will now function independently.
As two independent hotplates
Use the flexible cooking zone as two independent
hotplates.
Disconnecting hotplates
1.
Touch the
ý
symbol.
2.
Select the required hotplate by touching the
"
symbol.
3.
Select the required heat setting from the settings
area.
The hotplate is activated.
Notes
■
If the hob switches itself off and then on again, the
flexible cooking zone is used as a single hotplate
again.
■
To change the configuration settings for the flexible
cooking zone, refer to section
Linking the two hotplates
Touch the
ý
symbol.
The flexible cooking zone has now been activated.
As a single hotplate
Diameter smaller than or equal to 13
cm
Place the cookware on one of the four posi-
tions that can be seen in the illustration.
Diameter greater than 13
cm
Place the cookware on one of the three
positions that can be seen in the illustration.
If the cookware takes up more than one
hotplate, place it starting on the upper or
lower edge of the flexible cooking zone.
As two independent hotplates
The front and rear hotplates each have two induc-
tors and can be used independently of each other.
Select the required heat setting for each of the
hotplates. Use only one item of cookware on each
hotplate.
