en
Operating the appliance
12
Cooking modes menu
The hob has a number of different cooking modes.
To navigate to the Cooking modes menu, select the
cooking zone and touch the active cooking mode.
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch
the hotplate while the residual heat indicator
f
is still lit
or immediately after it goes out.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will remain lit as
long as the hotplate is still warm.
1
Operating the appliance
Operating the appliance
This chapter explains how to set a hotplate. The table
shows heat settings and cooking times for various
meals.
First-time use
When you switch on the appliance for the first time, the
menu for implementing the initial settings appears in the
display panel.
The main screen is then displayed.
Note:
You can change the language and any other
setting at any time. You can find further information on
selecting the language in section
.
Switching the hob on and off
Switch the hob on and off using the main switch.
To switch on: Touch the
#
sensor. A signal sounds and
the touch display lights up. After a short switch-on time,
the hob will be ready for operation.
To switch off: Touch the
#
symbol until the indicator
beside the main switch goes out. The residual heat
indicator remains lit until the cooking zones have
cooled down sufficiently.
Notes
■
The hob automatically switches off if all cooking
zones have been switched off for more than
30 seconds.
■
The selected settings are stored for 10 minutes after
the hob has been switched off. If the hob is switched
back on within this time, the previous settings are
retained. Section
information about changing the time in which the
selected settings are saved.
Setting the cooking zone
Set the required power setting from 1 to 9.
Power setting 1 = lowest setting.
Power setting 9 = highest setting.
Each power setting has an intermediate level.
Notes
■
To protect the fragile parts of your appliance from
overheating and electrical overloading, the hob may
temporarily reduce the power.
■
In order to prevent the appliance from producing
excess noise, the hob may temporarily reduce the
power.
Cooking mode
Function
”
Heat settings
Allows you to select the heat setting for
the cooking zone.
»
Cooking functions
The wireless cooking sensor automati-
cally detects the temperature as cooking
progresses.
Note:
This function will be ready to use
once the wireless cooking sensor is con-
nected to the control panel.
Õ
Frying sensor
The hob automatically detects the tem-
perature as frying progresses.
ÿ
powerMove
The temperature is adjusted by changing
the position of the cookware on the cook-
ing zones.
/
Dish assistant
A preset list of dishes for braising and
boiling.
3RZHU
OHYHO
6ZLWFKRII
WLPHU
