en
Cleaning and servicing
20
21.3 Overview of the hood control settings
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob
or individual cooking zones are switched on or off.
Setting
Selection
Description
Connection between hob and extractor hood
– Not connected/disconnected
– No function
– Connected to WLAN home network (Wi-Fi)
– Connected to WLAN and extractor hood
-
Automatic fan start-up
– Switched off. The extractor hood must be
switched on manually, if required.
– Switched on in automatic mode
1
. In automatic
mode, the extractor hood switches itself on when
one of the cooking zones is switched on.
– Switched on in manual mode. The extractor
hood is switched on at a specified setting when a
cooking zone is switched on.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
Fan run-on
– Fan switches off when the hob is switched off.
– Switched on in automatic mode
1
– Switched on with standard fan run-on
– No change to the settings
Setting for whether and how the fan is to run on
after switching off the hob.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
Switching the light on automatically
– Switched off
– Switched on
1
The light switches itself on when the hob is
switched on.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
Switching the light off automatically
– Switched off
1
– The light switches itself off when the hob is
switched off.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
1
Factory setting (may vary according to model)
22 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
22.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, a retailer or the online
shop www.siemens-home.bsh-group.com .
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Never use unsuitable cleaning products.
▶
Do not use cleaning products while the hob is still
hot. This may cause marks on the surface.
Unsuitable cleaning products
¡
Undiluted detergent
¡
Detergent intended for dishwashers
¡
Abrasive cleaning products
¡
Aggressive cleaning products such as oven spray
or stain remover
¡
Abrasive sponges
¡
High-pressure or steam jet cleaners
22.2 Cleaning the hob
Clean the hob after every use to stop cooking residues
from getting burnt on.
Requirement:
The hob must be cold. Do not allow the
hob to cool down if it has sugar stains, plastic or alu-
minium foil on it.
1.
Remove heavy soiling using a glass scraper.
2.
Clean the hob with a cleaning agent for glass
ceramic.
Follow the cleaning instructions on the packaging of
the cleaning agent.
Tip:
You can achieve good cleaning results using a
special sponge for glass ceramic.
22.3 Cleaning the hob surround
If the hob frame is dirty or stained after use, clean this.
Note:
Do not use a glass scraper.
1.
Clean the hob frame with hot soapy water and a soft
cloth.
Wash new sponge cloths thoroughly before use.
2.
Dry with a soft cloth.
