10
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
You will hear a signal and
‹‹
lights up in the display for 10
seconds. The
x
indicator lights up brightly. Touch the
0
symbol. The displays go out and the audible signal ceases.
Changing or cancelling the cooking time
Touch the
0
symbol repeatedly until the desired
x
indicator
lights up brightly. Change the cooking time or set to
‹‹
in the
settings range.
Timer function with sensor frying system
When you fry with the sensor frying system, the set cooking
time only begins when the temperature for the selected range is
reached.
Note:
You can set a cooking time of up to 99 minutes.
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
Basic settings section.
Note:
You can change the cooking time for a hotplate or switch
off the automatic timer for the hotplates.
Touch the
0
symbol repeatedly until the desired
x
indicator
lights up brightly. Change the cooking time or set to
‹‹
in the
settings area.
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
Setting procedure
1.
Touch the
0
symbol repeatedly until the
U
indicator for the
kitchen timer lights up.
‹‹
lights up on the timer display.
2.
Set the desired time in the settings range.
The timer starts counting down after a few seconds.
When the cooking time has elapsed
A signal sounds once the time has elapsed.
‹‹
lights up on
the timer display. The
U
indicator for the kitchen timer lights up
brightly. After 10 seconds, the indicator switches off.
Changing the time
Touch the
0
symbol repeatedly until the
U
indicator for the
kitchen timer lights up brightly. Make your new settings.
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
”
and
‰
flash alternately in the
hotplate indicator.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Wipe protection
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a wipe protection
function. Touch the
#
symbol. A signal sounds. The control
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
Note:
The main switch is excluded from the wipe protection
function. You can switch off the hob at any time.
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your needs.
Indicator
Function
™‚
Automatic childproof lock
‹
Switched off.*
‚
Switched on.
™ƒ
Audible signal
‹
Confirmation signal and operation error signal switched off.
‚
Only operation error signal switched on.
ƒ
Confirmation signal and operation error signal switched on.*
™†
Automatic timer
‹
Switched off.*
‚
-
ŠŠ
Duration after which the hotplates switch off
*Basic setting
