en
Automatic switch-off
10
Setting the correct time
1.
Select the kitchen timer with .
2.
Set the required time on the control panel.
7.3 Stopwatch function
The stopwatch function displays the time which has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the stop-
watch function is switched off as well.
Switching on the stopwatch function
▶
Touch .
a
appears on the timer display.
a
Time measurement begins.
a
Seconds are displayed during the first minute, then
minutes.
Note:
If you select another time-setting option in addi-
tion to the stopwatch function, the setting appears on
the timer display for 10 seconds. The stopwatch func-
tion is then displayed again.
Switching off the stopwatch function
▶
Touch again.
a
The timer display goes out.
8
Automatic switch-off
If you do not change the settings of a hotplate for a
long time, automatic switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1 to 10 hours).
The heat to the hotplate is switched off.
and the re-
sidual heat indicator / flash alternately on the hot-
plate display.
8.1 Continuing cooking after automatic
switch-off
1.
Touch any control.
a
The display goes out.
2.
Reset.
9
Keep-warm function
The keep-warm function allows you to melt chocolate
or butter and to keep food or cookware warm.
9.1 Switching on the keep-warm function
1.
Touch
.
2.
Select the hotplate.
a
lights up on the heat setting display.
9.2 Switching off the keep-warm function
1.
Touch
.
2.
Select the hotplate.
a
lights up on the heat setting display.
10
Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
10.1 Activating wipe protection
▶
Touch .
a
A signal sounds.
a
lights up brightly.
a
The control panel is locked for 30 seconds.
11
Energy consumption display
This function indicates the total amount of energy con-
sumed between switching the hob on and switching it
off again.
Once switched off, the energy consumption is dis-
played in kilowatt hours, e.g. 1.08 kWh, for
10 seconds.
The accuracy of the display depends on various factors
such as the voltage quality of the power supply.
"The display can be activated in the basic settings. "