18
■
Poultry pieces will turn out particularly crispy and brown if you
baste them towards the end of the grilling time with butter,
salted water or orange juice.
■
After grilling, fruit can be seasoned to taste with honey, maple
syrup or lemon juice.
■
Before grilling, you can precook vegetables which take a long
time to cook (e.g. corn on the cob).
■
Grill fish fillets skin side up first. Brush the skin with oil so that
it does not stick to the wire rack.
■
Serve grilled food hot. Do not keep it warm or it will become
tough.
■
Dripping fat can catch fire on the heating elements and can
result in brief formation of flames and smoke. To reduce this,
very fatty foods should be grilled over a water bath.
Timer
The timer can be used as a kitchen timer. The timer does not
switch the grill on or off.
With the timer, you can set a time up to 99 minutes. You can
also use the timer when the grill is switched off.
Setting procedure
1.
Touch the
0
symbol until the
U
indicator lights up.
‹‹
lights up on the timer display.
2.
Set the desired time in the settings range.
A signal sounds once the time has elapsed.
‹‹
lights up on
the timer display. The display switches off after 10 seconds.
To correct the time, touch the
0
symbol and set the time again
in the settings range.
Basic settings
Your appliance has various basic settings. You can adapt these
settings to your needs.
Changing the basic settings
The grill must be switched off.
1.
Switch on the grill.
2.
Within the next 10 seconds, touch the
0
symbol for 4
seconds.
™ƒ
flashes in the right-hand display and
ƒ
appears in the left-
hand display.
3.
Touch the
0
symbol repeatedly until the desired indicator
flashes in the right-hand display.
4.
Set the desired value in the settings range.
5.
Touch the
0
symbol for 4 seconds.
The setting is activated.
Switching off without saving
To exit the basic setting, switch the appliance off at the main
switch. Changes are not saved.
Care and cleaning
In this chapter you will find tips on how to maintain and clean
your appliance correctly.
ã=
Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
ã=
Risk of electric shock!
Do not use high pressure washers or steam cleaners to clean
the appliance.
Cleaning the appliance
Clean the appliance after each use, once it has cooled down.
This will help prevent residues from burning on. Once residues
have burned on several times, they become more difficult to
remove.
Do not scrape burnt-on residues off, but leave them to soak in
soapy water.
Remove the wire rack and swivel the heating element upwards.
Remove the lava stone tray with the lava stones.
Display
Function
™ƒ
Audible signal
‹
Confirmation signal and operation error signal
are switched off.
‚
Only the operation error signal is switched on.
ƒ
Confirmation signal and operation error signal
switched on.*
™‡
Duration of the timer end signal
‚
10 seconds.*
ƒ n
30 seconds.
„
1 minute.
™‹
Reset to basic setting
‹
Switched off.
‚
Switched on.
* Basic setting
