Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
en
Operating the appliance
6
1
Operating the appliance
Operating the appliance
In this section, you can find out how to set the
hotplates. The table shows heat settings and cooking
times for various meals.
Switching the hob on and off
The main switch is used to switch the hob on and off.
Switching on
Touch the
#
symbol. An audible signal sounds. The
display light above the main switch and the heat setting
indicators
‹
light up. The hob is ready to use.
Switching off
Touch the
#
symbol until the indicator light above the
main switch and the heat setting displays go out. All
hotplates are switched off. The residual heat indicator
remains on until the hotplates have cooled down
sufficiently.
Notes
■
The hob switches off automatically if all hotplates
have been switched off for more than 20 seconds.
■
The settings remain stored for 4 seconds after the
hob has been switched off. If you switch it on again
during this time, the hob will operate using the
previously stored settings.
Setting a hotplate
Set the desired heat setting on the control panel.
Heat setting 1 = Lowest power
Heat setting 9 = Highest power
Every heat setting has an intermediate setting. This is
identified by a dot.
Setting the heat setting
The hob must be switched on.
1.
Touch the
ü
symbol to select the hotplate.
‹
lights up in the heat setting display,
¬
lights up
under the heat setting display.
2.
Set the required heat setting in the control panel.
Changing the heat setting:
Select the hotplate and set the required heat setting in
the control panel.
Switching off the hotplate
Use the
ü
symbol to select the hotplate. Set the control
panel to 0. After about 10 seconds, the residual heat
indicator appears.
Note:
The last selected hotplate remains activated. You
can set the hotplate without selecting it again.
Table of cooking times
The following table provides some examples.
Cooking times and heat settings may vary depending
on the type of food, its weight and quality. Deviations
are therefore possible.
For bringing liquids to the boil, use heat setting 9.
Stir thick liquids occasionally.
Food that needs to be seared quickly or food which
loses a lot of liquid during initial frying is best seared in
several small portions.
Tips for energy-saving cooking can be found in the
Environmental protection section.
Í
Ongoing
cooking set-
ting
Ongoing cook-
ing time in min-
utes
Melting
Chocolate coating
1-1.
-
Butter, honey, gelatine
1-2
-
Heating and keeping warm
Stew (e.g. lentil stew)
1-2
-
Milk**
1.-2.
-
Heating sausages in water**
3-4
-
Defrosting and heating
Frozen spinach
2.-3.
10-20 min
Frozen goulash
2.-3.
20-30 min
Poaching, simmering
Dumplings
4.-5.*
20-30 min
* Ongoing cooking without a lid
** Without lid
*** Turn frequently
Í