background image

10

Frying function

This function is used for frying on the front hotplates, regulating 

the temperature of the pan.

Deep-frying features

The hotplate only heats when necessary. This way energy is 

saved. The oil and fat do not overheat.

Notes

Never leave oil or fat cooking unattended.

Place the pan at the centre of the hotplate. Ensure that the 

base of the pan is the right diameter.

Do not cover the pan with a lid. Doing so will cause the 

automatic regulation not to function. A protective screen may 

be used without affecting the automatic regulation

Only use oil which is suitable for frying. If using butter, 

margarine, olive oil or pork lard, select the 

min

 temperature 

setting.

Pans to use with the frying function

There are pans suited to this function which may be purchased 

later as optional accessories, in specialised stores, or through 

our Technical Assistance Service. Always indicate the related 

reference code. 

HZ390210

 small pan (15 cm in diameter).

HZ390220

 medium pan (19 cm)

HZ390230

 large pan (21 cm)

The pans are non-stick. Food may also be fried in a small 

amount of oil.
The temperature settings shown below have been specially 

adjusted for these types of pans.

Note: 

If a different type of pan is used, try it first at the lowest 

temperature, adjusting it as required. The pans may overheat.

Temperature settings

Programming

Select the correct temperature setting from the table. Put a pan 

on the hotplate.
The range must be switched on.

1.

Press the 

~

symbol. The 

indicator lights up on the hotplate 

display. 
The possible temperature settings are displayed in the 

programming panel.

2.

Within the next 10 seconds, select the desired temperature 

level in the programming panel. 
The frying function has been activated.

The temperature symbol stays lit until the frying temperature is 

reached. Then the signal sounds and the temperature symbol 

light goes out.

3.

Add oil or lard to the pan and then the food.
As usual, turn the food in order to prevent it from burning.

Turning off the deep-frying function

Set to 0 in the programming panel.

Power level

Temperature

Suitable for

max

high

e.g., potato pancakes, sautéed potatoes, and rare beefsteak.

med

medium-high

e.g., thin fried foods like frozen pies, escalopes, ragu, vegetables

low

medium-low

e.g. thick fried food such as hamburgers and sausages, fish.

min

low

e.g. omelettes, using butter, olive oil or margarine

Summary of Contents for EH6..ME2 series





















Reviews: