Siemens Drager medical Carina, Instructions For Use Manual, Page: 35 / 144

Instructions for Use Carina SW 3.n
35
Preparation
Attach universal bracket with standard rail
z Attach right side of holder to right side of
column.
1 Make sure the nose of the universal bracket is
completely behind the revolving edge.
2 Attach the left side of the holder to the left side
of the column. Make sure the nose of the uni-
versal bracket is completely behind the revolv-
ing edge.
3 For level adjustment use the plate on the upper
side of the universal bracket.
4 Level the universal bracket.
5 Secure adjusting lever.
Height Adjustment
5
Release adjusting lever and adjust height of
universal bracket.
z Level universal bracket.
z Retighten adjusting lever.
Attaching accessories to the standard rail
z Attach accessory to the standard rail. Observe
the maximum payload! See "Trolley" on
page 118.
CAUTION
Check tension of universal bracket: The universal
bracket must be securely seated on the column.
Otherwise the universal bracket may loosen.
086
1
087
2
3
088
4
5