manualshive.com logo in svg

Siemens DESIGO PXM20, User Manual

Share
Download
Siemens DESIGO PXM20 User Manual Download Page 36

36/70 

Siemens 

PXM20 / PXM20-E operator unit 

CM110754en_02 

Building Technologies 

Alarms 

17 Dec 2009 

All recently received alarms are listed in this dialog box.  

Each line consists of an alarm symbol, the object name or 
notification text, and the date and time.  

The 

Alarm viewer 

tracks the state of an alarm as follows: If the 

alarm state changes (e.g. an alarm is acknowledged) the associated 
entry also changes.  

Note

Note that for each object, only the current alarm, i.e. the last alarm 
received, is displayed. 

When a fault has been cleared and acknowledged the relevant entry 
disappears from the list. 

7.2.2 

Selecting an event or alarm 

 

5.  Select the alarm which you wish to acknowledge. The 

Alarm 

message

 dialog box will appear.    

6.  You can now select either 

ACKNOWLEDGE

 or 

DETAILS

. 

 

The procedure for events is basically the same as for alarms. 
Unlike alarms, however, you do not need to acknowledge events.  

 

 

Tracking the 
alarm state 

Summary of Contents for DESIGO PXM20







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands