background image

 

GAMMA 

instabus

 

Technical Product Information 

March 2008 

DELTA profil 

Display and control unit 

UP 585 

5WG1 585-2AB_1 

DELTA style 

Display and control unit 

UP 584 

5WG1 584-2AB_1 

DELTA ambiente 

Display and control unit 

UP 586 

5WG1 586-2AB_1 

Siemens AG 

UP 58x, 6 pages 

Technical Manual 

Automation and Drives Group 

 

 

Electrical Installation Technology 

©

 Siemens AG 2008 

Update: http://www.siemens.com/gamma 

P.O. Box 10 09 53, D-93009 Regensburg  

Subject to change without prior notice 

 

 

2.3.1.2/1 

 

 

 

 

 

Product 

DELTA profil 

DELTA style 

DELTA ambiente 

 
Display and control 
unit

 

5WG1 585-2AB01  pearl grey 
5WG1 585-2AB11  titanium white 
5WG1 585-2AB21  anthracite 
5WG1 585-2AB71  silver 

5WG1 585-2AB11  titanium white 
5WG1 584-2AB21  basalt black 
5WG1 584-2AB41  platinum metallic 

5WG1 586-2AB01  arctic white 

ordered separately from the DELTA ranges 

Frames 

cut out frames 

--- 

--- 

Intermediate frames 

--- 

5TG1 328      titanium white 
5TG1 368      basalt black 
5TG1 328-1  platinum metallic 

--- 

 

 

 

Diagram 1: Installation of the display unit 

 

 
 
 
B1  Driver with bus connection  *) 
B2 Frame 
B3 Intermediate frame (only for DELTA style) 
B4  Display unit  *) 
B5  Fixing screw  *) 
B6  Blende  *) 
 
*) Lieferumfang 
 
 
 

 
 

Product and Applications Description 

 
The display unit is used to indicate freely programmable 
messages. A message generally consists of read-only 
text and placeholders.  
The display unit can be freely configured with different 
fonts, characters and symbols. Depending on the pa-
rameter settings, it is possible to assign alarm functions 
to the messages. The display is carried out via a graphi-
cal LC display. If Arial font is used in 12 pt, 5 lines can be 
displayed. The LC display contains green/yellow back-
lighting which can be switched on and off via software. 
The output of an alarm tone can also be set. 

The various messages can be selected by pressing the 
two push buttons on the display unit. It is also possible 
to operate selectable bus functions with two further 
push buttons. 
The display unit is placed on the bus driver module 
together with the relevant frame. It can only function in 
connection with this bus driver module and an appro-
priate application program i.e. the display unit consists 
of the device [hardware] and the application program 
[software]. 
The frames are not included with supply and must be 
ordered separately. The intermediate frame should be 
used for DELTA style. 

B1

B2

 

B3

 

B4

 

B5

 

B6

 

Summary of Contents for Delta Series







Reviews: