Mounting/Installation
Acoustic and optical configuration
5
32 | 56
Building Technologies
A6V10320094_m_en_--
Fire Safety
2017-10-31
WARNING
Danger of falling
w
Danger of injury
When installing, use a secured ladder or work platform.
Mounting
w
The detector base is fitted and installed.
w
The detector base is in a location that allows for the beam angle in the DBS728
and DBS729.
w
The previously fitted point detector has been removed from the detector base.
1. Install the required accessories: LP720, DBZ1193A.
2. Place the interbase on the detector base and turn it clockwise until it snaps into
place.
3. Place either the cover plate BP720 or the point detector on the interbase and
turn it clockwise until it snaps into place.
a
The interbase is connected to the detector base and ready for use.
Removing the interbase
1. Remove the point detector.
2. Release the interbase's detector locking device.
3. Unscrew the interbase from the detector base by turning counter-clockwise.
