©
S
iem
ens AG
2003, W:\IC
M
_MP
_CC
Q
_S_U
M
\04F
L00641
Em
oty\Wo
rk\f
rame
_und
_Grafik\em
o_
us_FC
C_zw
eite
r_
la
uf
\fra
m
e_en\U
LYR_FA
Q.f
m
149
Questions & Answers
VAR Langua
ge: a
m
; VAR issue
date: 040819
left page (149)
of CX70 Ulysses refresh , am, A31008-H7103-A40-1-4A19 (13.10.2004, 15:04)
Questions & Answers
If you have any questions about using your phone, visit us at
ww.siemens-mobile.com/mobilescustomercare anytime. For additional help, we have
listed below some frequently asked questions and answers.
Configuration service
To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,
you can use a configuration service. This service is used to have the necessary settings for
your mobile phone sent to you by SMS. We recommend that you contact your network
provider who will send you the configuration messages.
As an alternative you can also use the "Setting Configurator" at
www.siemens-mobile.com/mobilescustomercare
. Siemens will then send you the
configuration messages. Please follow the instructions contained in those messages.
Problem
Possible causes
Possible solution
Phone cannot be
switched on.
On/Off key not pressed long
enough.
Press On/Off key for at least two seconds.
Flat battery.
Charge battery. Check charging indicator in the dis-
play.
Battery contacts dirty.
Clean contacts.
See also below under “Charging
error”
Too little standby
time.
Frequent use of organiser and
games.
Restrict use if necessary.
Fast search activated.
Deactivate speed search(p. 120).
Display illumination on.
Switch off display illumination (p. 104).
Unintentional keystrokes
(illumination!).
Activate key lock (p. 117).
Charging error
(charge icon not
displayed).
Battery totally discharged.
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Temperature out of range:
+5 °C to +40 °C.
Make sure the ambient temperature is right, wait for
a while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and telephone connection
socket, clean them if necessary, then insert battery
again.
No mains voltage.
Use different mains power socket, check mains
voltage.
Wrong charger.
Only use original Siemens accessories.
Battery faulty.
Replace battery.