en
Childproof lock
26
To reduce the standby consumption of your appliance,
you can hide the clock.
14 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
14.1 Activating the childproof lock
Requirement:
The appliance is switched off.
▶
Press and hold
for approximately 4 seconds.
a
The control panel is locked.
a
appears on the display.
Note:
If you have set a timer duration , this continues
to count down. While the childproof lock is active, the
timer duration cannot be changed.
You can end the signal tones by touching any field.
14.2 Deactivating the childproof lock
▶
Press and hold
for approximately 4 seconds.
a
The control panel is unlocked.
15 Basic settings
You can configure the basic settings for your appliance to meet your needs.
15.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Selection
Description
Signal duration
= short = 10 seconds
= medium = 30 seconds
1
= long = 2 minutes
Set the signal duration for
after a cooking time
elapses or the timer
reaches zero.
Button tone
= off
= on
1
Switch the button tones on
or off.
Display brightness
= low
= medium
1
= high
Set the brightness of the
display.
Time indicator
= off
= on
1
Show the clock time in the
display.
Interior lighting
= off
= on
1
Switch the interior lighting
on or off.
Water hardness
= softened
= soft
= moderate
= hard
= very hard
1
.
Factory setting
= off
1
= on
Reset the changed settings
to the factory settings.
Demo mode
= off
1
= on
Switch demo mode on or
off.
Note:
Demo mode is only
visible in the first 5 minutes
after connecting the appli-
ance to the mains.
1
Factory setting (may vary according to model)
15.2 Changing the basic settings
Requirement:
The appliance is switched off.
1.
Press and hold for a few seconds.
a
The first basic setting is shown on the display.
2.
Use the rotary selector to change the basic setting.
