Use Cases
590
Unrestricted
SICAM A8000 / CP-8000 • CP-8021 • CP-8022 Manual
DC8-037-2.02, Edition 10.2017
E.3
Usage as Telecontrol Substation with Integrated Switch
for External System Connection
Features
•
Communication with the control system via IEC 60870-5-104
(Ethernet-Interface, X1 or X4, can be set by parameter)
•
Communication with the external system via IEC 60870-5-104
(Ethernet interface, X1 or X4, can be set by parameter)
•
CP-8000, CP-8021 or CP-8022 is used as switch between control system and external
system
•
1 IP address
•
1 subnet mask
•
1 default router
•
Parameter
Network settings | IP address | Mode of Ethernet Ports
=
1 IP address (connected ports in switch mode)
(in this case both Ethernet interfaces use the MAC address of X1)
Office Zone
X4
X1
Router
E SC
CP-8000
CP-8021
CP-8022
Control Center
IP address
172.16.0.4
255.255.0.0
172.16.0.254
Subnet mask
Default router
PREx / ET84
IP address
Subnet mask
Default router
172.16.0.3
255.255.0.0
172.16.0.254
IP address
172.17.0.22
Subnet mask 255.255.0.0
IP address
172.16.0.254
External
device
Substation Zone
Control Center Zone
Summary of Contents for CP-8000
Page 604: ......