Microwave
en
17
2.
Touch the microwave setting field to select the
power setting you require.
The microwave setting will be highlighted and a
default cooking time will be shown on the display.
3.
Use the rotary selector to set the required cooking
time.
Note:
You can also set the cooking time first and
then the microwave setting.
4.
Touch the
u
button.
The time remaining will count down on the display.
The
u
LED will be lit.
The cooking time has elapsed
An audible signal sounds. Open the appliance door or
touch any field.
Changing the cooking time
Use the rotary selector to change the cooking time.
After a few seconds, the change is applied.
Changing the microwave power output
Touch
·
until the required level is selected in the
display.
Notes
■
Touching it several times switches the power levels
from the highest to the lowest level.
■
If the microwave function is only added after the
start, the appliance pauses. Press
u
to start
operation
Pausing the operation
1.
Touch the
u
field or open the appliance door.
The operation is suspended and the
u
LED
flashes.
2.
Close the appliance door.
3.
Touch the
u
field.
The operation is continued and the
u
LED lights
up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
Note:
The fan may continue to run after the appliance
has been paused or stopped.
Setting the microwave to combined
operation
Setting the microwave to combined operation
You can combine the microwave function with the grill
and steam function. The appliance heats up and the
microwave is switched on at the same time. As a result,
the food is ready in a much shorter time.
Combination options
■
‹
Steam
■
(
Grill
Exception:
ß
Microwave setting 1000
W
Setting combined operation
Example in the picture: Full-surface grill
(
at level
2
with microwave at 360
W, 17
minutes.
1.
Use the function selector to set the Full-surface
grill
(
.
Level 3
appears in the display as a default value.
2.
Use the rotary selector to set the required level.
3.
Touch the microwave power output field
·
until the
required level is selected in the display.
A default cooking time appears.
4.
Set the cooking time using the rotary selector.
5.
Touch
u
.
The operation starts and the
u
LED lights up. The
cooking time starts counting down.
The cooking time has elapsed
A signal sounds and the
u
symbol stops lighting up.
Combination mode has finished. Touch any field to end
the acoustic signal.
Changing the microwave power output
Touch
·
until the required level is selected in the
display.
Notes
■
Touching it several times switches the power levels
from the highest to the lowest level.
■
If the microwave function is only added after the
start, the appliance pauses. Press
u
to start
operation
