Siemens CLINITEK Status+, Operator'S Manual, Page: 98 / 172

98 CLINITEK Analyzer Operator’s Guide
System C
onf
iguration
Patient ID • Enabled prompts you to
enter a patient ID when you
run a test.
• Disabled (default) does not
prompt you to enter a patient
ID when you run a test.
The system stores up to 950
patient test results.
When the patient test results list
contains 950 patient tests (or the
maximum amount for your
system), the system deletes the
oldest test from the list.
You cannot recall a deleted test
result.
Note If you disable Patient
Name and Patient ID , the system
displays a sequential test number
with the test results.
Bar-code reader settings 1. Select Barcode Reader
Settings .
2. Enable or disable the bar-code
reader:
○
Enabled requires you to
enter a patient name and
patient ID only by bar-code
reader.
○
Disabled (default) allows
you to enter a patient
name and patient ID by
bar-code reader, or by the
onscreen keyboard.
3. Select Done to return to the
Custom Settings Patient
Information, page 2 of 5
screen.
Custom Setting Description