Siemens CLINITEK Status+, Operator'S Manual, Page: 94 / 172

94 CLINITEK Analyzer Operator’s Guide
System C
onf
iguration
Setting and Removing a Password
You can set a password to protect the Instrument Set Up settings. After
you set a password, you cannot make changes to the Instrument Set
Up settings until you enter the password. You can remove the
password.
To set a password, perform the following steps:
1. On the
Select Ready screen, select Instrument Set Up .
2. On the Choose Settings screen, select Set Password .
3. Enter a password using the alphabetic and/ or numeric onscreen
keyboards (maximum of 12 characters).
If you change your mind and do not want to enter a password,
select the left arrow key (Back) on the alphabetic keyboard. The
Choose Settings screen displays.
Note Be sure to keep a record of the password so that you can
access Instrument Set Up. If you lose your password, call your local
technical support provider or distributor.
4. Select Enter .
5. Select Done .
To remove a password, perform the following steps:
1. On the
Select Ready screen, select Instrument Set Up .
Color & Clarity
entry required
None None None None
Display results by
Patient Name or
Patient ID Patient
Name Patient
Name Patient
Name Patient
Name
Output of
instrument serial
number with
results data Disabled Disabled Disabled Disabled
Power Save Disabled Disabled Disabled Disabled
Printer Automatic Automatic Automatic Automatic
Sound Enabled Enabled Enabled Enabled
Setting Spanish Swedish Japanese Chinese