manualshive.com logo in svg

Siemens CLINITEK Status+, Operator'S Manual, Page: 7 / 172

Share
Download
Siemens CLINITEK Status+ Operator'S Manual Download Page 7

CLINITEK  Analyzer Operator’s Guide

7

Introduction

1  Introduction

The introduction explains how to get started, unpack, and install your 
CLINITEK Status

®

+ analyzer. The introduction also includes an overview 

of the analyzer.

Intended Use

The CLINITEK  Urine Chemistry Analyzer is a portable, easy to 
use analyzer. It is designed to read only 
Siemens Healthcare Diagnostics Reagent Strips for Urinalysis and 
Clinitest

®

 hCG tests.

This analyzer is intended for the measurement of the following in 
urine: Albumin, Bibilirubin, Blood (Occult), Creatinine, Glucose, 
Ketone, Leukocytes, Nitrite, pH, Protein, Protein-to-Creatinine Ratio, 
Albumin-to-Creatinine Ratio, Specific Gravity, Urobilinogen, and 
human Chorionic Gonadotropin (hCG).

These measurements are used to assist diagnosis in the following 
areas:

•

Kidney function

•

Urinary tract infections

•

Metabolic disorders (such as diabetes mellitus)

•

Liver function

•

Pregnancy

Tests perfomed using the CLINITEK  analyzer are intended for 

in 

vitro

 diagnostic use only.

The CLINITEK  analyzer is intended for near patient (point-of-
care) facilities and centralized laboratory locations.

Summary and Explanation

The urinalysis strips also measure physical characteristics, including 
acid-base balance and urine concentration. Test results can be used 
along with other diagnostic information to rule out certain disease 
states and to determine if microscopic analysis is needed.

Summary of Contents for CLINITEK Status+













































































































































































Reviews:

No comments