Siemens CLINITEK Status+ Operator'S Manual Download Page 43

Page: 43 / 172

CLINITEK Analyzer Operator’s Guide

Op
erations

2. Select

Notes

to view the sample interference notes, if the analyzer

generated them for the test.

The

Interference notes

screen displays up to 5 sample

interference notes.

Note

If you disable the

Sample Interference

Notes

setting in

Instrument Set Up, or the analyzer does not generate sample
interference notes, the

Notes

button does not display. If you run a

test with this feature disabled, the analyzer does not generate
notes at the time of the actual test. If you enable the

Sample

Interference

Notes

setting, and then recall the test results, the

analyzer generates notes for this patient test.

3. Select the up and down arrows to scroll through the notes.

4. Select

Done

to return to the main

Results

screen.

Printing the Urinalysis Strip Full Test Results

Print the urinalysis strip Full Test results manually or automatically, or
send the results to a computer.

To print the urinalysis strip Full Test results manually, select

Print

print the test results.

The test results printout includes the following information:

•

Patient name and Patient ID

•

Urinalysis strip type

•

Lot number, if configured

•

Lot expiration date, if configured

•

Test date

•

Test time

•

Operator

•

Test number

•

Color

•

Clarity

•

Results (If the results are positive, an asterisk (*) displays next
to the results, only if you selected Mark Positive Results in
Instrument Set Up.)

Summary of Contents for CLINITEK Status+













































































































































































Search results

Summary of Contents for CLINITEK Status+

Reviews:

Siemens CLINITEK Status+, Operator'S Manual, Page: 43 / 172

Search results

Summary of Contents for CLINITEK Status+

Reviews: