manualshive.com logo in svg

Siemens CLINITEK Status+, Operator'S Manual, Page: 34 / 172

Share
Download
Siemens CLINITEK Status+ Operator'S Manual Download Page 34

34

CLINITEK  Analyzer Operator’s Guide

Op

er

at

ions

Depending on the configuration settings, the test results printout 
could include any of the following information:

•

Date

•

Time

•

Test number

•

Results

•

Sample interference notes (if enabled in Instrument Set Up)

For instructions on how to set up the analyzer so that you can print 
the results automatically or send the results to a computer, see 
Section 7, 

System Configuration

, 

Changing the Connectivity 

Settings

‚ page 110.

Completing the Urinalysis Strip Quick Test

Complete the Quick Test for one strip or continue testing one strip at a 
time, until you finish testing all the strips you want to analyze.

To complete the urinalysis strip Quick Test, perform the following 
steps:

1. Remove the used urinalysis strip from the test table, and dispose of 

it according to your standard laboratory procedures.

2. Wipe the table insert, if necessary (see Section 4, 

Maintenance

, 

Weekly Cleaning of the Test Table and Test Table Insert

‚ page 57).

3. Report the results to a laboratory supervisor or physician.

4. Select 

Done

 to complete the test.

The results display on the screen for 2 minutes. Then, the 

Prepare 

Test

 screen displays, ready for you to prepare the next strip Quick 

Test.

Summary of Contents for CLINITEK Status+













































































































































































Reviews:

No comments