Siemens CLINITEK Status+ Operator'S Manual Download Page 143

Page: 143 / 172

CLI
NIT
EK

Sta

tus+ An

aly

zer Operator’s

uide

143

English Units – International (SI)

If you select English International (SI) unit of measurement, the reagent strip and cassette tests display the
following results.

Reagent Strip Tests

The following table contains the test, abbreviation, units, Normal System results, and Plus System results for English
SI units for reagent strips.

The results shown in the shaded areas are marked as positives, if you enabled Mark Positive Results in Instrument
Set Up. They are marked by asterisks when displayed, when printed, and when the CLINITEK analyzer sends
the data to a host computer.

Table D-3: English, Units – International SI, Reagent Strips

Test

Abbreviation

Units

Reported Results
Normal System

Plus System

Glucose

GLU

mmol/L

Negative

5.5

>=55

Trace

Glucose
(CLINITEK
Microalbumin 9)

GLU

mmol/L

Negative

5.5

Trace

>=110

Summary of Contents for CLINITEK Status+













































































































































































Search results

Summary of Contents for CLINITEK Status+

Reviews:

Siemens CLINITEK Status+, Operator'S Manual, Page: 143 / 172

Search results

Summary of Contents for CLINITEK Status+

Reviews: