Siemens CLINITEK Status+ Operator'S Manual Download Page 104

Page: 104 / 172

104

CLINITEK Analyzer Operator’s Guide

System C

onf

iguration

Resetting the Test Sequence Number

The test sequence numbers run from 0001 to 9999. You can reset the
test sequence number to start at 0001 for the next test.

To reset the test sequence number, perform the following steps:

1. On the

Select Ready

screen, select

Instrument Set Up

2. On the

Choose Settings

screen, select

Test sequence number

The

Sequence Number

screen shows the next test number.

3. Select

Reset to 0001

4. Select

Done

twice to return to the

Select Ready

screen.

Changing the Instrument Settings

The instrument settings control the way the system displays
information and operates.

The instrument settings include the following options:

•

Results Format

•

System Settings

•

Display Contrast

•

Connectivity

•

Urinalysis Test Settings

•

Authorized Operator

•

Printer Settings

•

QC Settings

•

Software Update

To change the instrument settings, perform the following steps:

1. On the

Select Ready

screen, select

Instrument Set Up

2. On the

Choose Settings

screen, select

Instrument Settings

3. On the

Instrument Settings

screen, select an option.

4. Select

Next

Previous

to move forward and backward through

the screens.

5. When you finish, select

Done

Summary of Contents for CLINITEK Status+













































































































































































Search results

Summary of Contents for CLINITEK Status+

Reviews:

Siemens CLINITEK Status+, Operator'S Manual, Page: 104 / 172

Search results

Summary of Contents for CLINITEK Status+

Reviews: